Piaggio Vespa reliability and MOT data
Time period snapshot: Last 5 years
Manufacturer: Piaggio
Model: Vespa
Piaggio Vespa is a scarce model in this snapshot, with 13,188 represented vehicles and 0.03% of the active UK pool tracked by AutoRank. For the last 5 years, it has a pass rate of 88.1% from 88,019 MOT tests, with a reliability score of 70. The current pool shows an average of 11,528 miles and an average age of 13.6 years, while mature-fleet mileage is estimated at 12,781 miles. Petrol leads the fuel split, followed by electric, and the most frequent defect themes are tyre condition, lighting and braking components. The practical read is that the Piaggio Vespa looks a little better than average, but still rewards careful checks on mileage and maintenance.
| Fuel | Vehicles |
|---|---|
| PETROL | 13,148 |
| ELECTRIC | 36 |
| DIESEL | 2 |
| OTHER | 2 |
| Defect | Count |
|---|---|
| Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) | 1,089 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 858 |
| Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) | 493 |
| Headlamp aim too low (4.1.2 (a)) | 481 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 447 |
| Headlamp aim too high (4.1.2 (a)) | 405 |
| Rear Position lamp not working (4.2.1 (a)) | 402 |
| Front Brake excessively binding (1.2.1 (f)) | 378 |
| Horn not working (7.7 (a)) | 330 |
| Rear reflector missing (4.8.2 (a) (ii)) | 291 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 276 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 274 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 270 |
| Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii)) | 263 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 234 |
| Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) | 211 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 206 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 202 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 200 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 190 |
| Registration plate does not conform to the specified requirements (0.1 (d)) | 188 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 188 |
| Stop lamp not working (4.3.1 (a) (ii)) | 177 |
| Rear Tyre tread not clearly visible (5.2.3 (e)) | 168 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 168 |
Reliability rank breakdown
Piaggio Vespa reliability, calculated from MOT results for this static model view.